Fitting Front Arches

GenIII Bodykit Still Ongoing.....as of July 2019
Post Reply
Keith Phillips
Site Admin
Posts: 19
Joined: Wed Jul 24, 2019 11:24 pm

Fitting Front Arches

Post by Keith Phillips »

Tricky to fit and can't be rushed....some pictures of the front arches to compare with yours.....One hole gets filled in after being flattened.....rear lower.

I like to have a lip for added strength so you can see here where I trim back to.

at the front and rear edges of the plastic arch some trimming is required.......at the edge which meets the sill you'll need some boiling water to heat the plastic for the final fit.
20180615_192536.jpg
20180615_192536.jpg (4.56 MiB) Viewed 184 times
20190821_182701.jpg
20190821_182701.jpg (4.21 MiB) Viewed 184 times
20190821_182705.jpg
20190821_182705.jpg (4.23 MiB) Viewed 184 times
20190821_182709.jpg
20190821_182709.jpg (4.22 MiB) Viewed 184 times
FB_IMG_1523100949646.jpg
FB_IMG_1523100949646.jpg (29.83 KiB) Viewed 184 times

Post Reply