Supercharged and Turbocharged Jimny

[Keith Phillips]

It all starts with buying a Swift Sport M16A VVT.

Compression ratio is a little high so it gets 9.0:1 Wiseco Pistons.

The con-rods are a little weak so it got K1 H beam rods installed.

A 0.5mm rebore brings the capacity to exactly 1600CC and leaves room for future reboring.

All the nuts and bolts on the cylinder head and crank were changed to ARP high strength ones.

A new trigger wheel was laser cut and installed for the Megasquirt MS3 to use the original crank sensor
and the cam had the trigger modified to leave a single trigger for sequential ignition and EFI.

20190527_211925.jpg (4.95 MiB) Viewed 213991 times

20190528_202551.jpg (4.06 MiB) Viewed 213991 times

20190528_202547.jpg (4.39 MiB) Viewed 213991 times

Some pictures taken while figuring things out on the supercharger side.

20190602_171650.jpg (4.54 MiB) Viewed 213991 times

20190602_135737.jpg (3.76 MiB) Viewed 213991 times

20190602_135739.jpg (4.02 MiB) Viewed 213991 times

Flange for the Turbo manifold.

20190615_213932.jpg (5.01 MiB) Viewed 213991 times

The mount figured and fitted on the engine.

20190714_125131.jpg (4.94 MiB) Viewed 213991 times

20190713_164130.jpg (2.01 MiB) Viewed 213991 times

Programmed in Mastercam

20190713_121425.jpg (3.75 MiB) Viewed 213991 times

Insulating spacer for the Jenvey inlet manifold.

20190710_200139.jpg (4.9 MiB) Viewed 213991 times

Newer cam cover means COPs and no coil cover.
Made one and painted it wrinkle finish black.

20191214_171439.jpg (4.3 MiB) Viewed 213991 times

20200104_163848.jpg (3.75 MiB) Viewed 213991 times

20200104_120725.jpg (3.77 MiB) Viewed 213991 times

Onto the Turbo Side.

Making a start on the manifold.

20190718_201212.jpg (5.27 MiB) Viewed 213991 times

20191222_161644.jpg (3.53 MiB) Viewed 213991 times

20191227_135119.jpg (3.77 MiB) Viewed 213991 times

Probably going to plumb the external wastegate into the exhaust.....for peace!

[Jack]

My god that looks beautiful
Are we guessing hp matey i say 240

[Tom]

Incredible, can't wait to see this progress.

[Keith Phillips]

Bit of bling and the top is just about finished.

20200110_183845.jpg (3.9 MiB) Viewed 213848 times

[The Cameraman]

Wow,

what beautiful work.

[Keith Phillips]

Supercharger belt drive started.

[Ruamann]

Just amazing, like. Giz it haha.