GenII Jimny Bodykit

The GenII Getting Somewhere!
Post Reply
Keith Phillips
Site Admin
Posts: 30
Joined: Wed Jul 24, 2019 11:24 pm

GenII Jimny Bodykit

Post by Keith Phillips »

I was quite happy with the GenI Jimny bodykit......just needed a little something else

I'd built my own CNC Router 4 or 5 years previous so decided to draw some patterns up and machine them then coat them in epoxy pattern paint to make them last longer.

Here's the rendering from the 3D Models.
untitled.12.png
untitled.12.png (2.83 MiB) Viewed 7635 times
So onto actually machining the patterns.
20150818_202342.jpg
20150818_202342.jpg (3.77 MiB) Viewed 7635 times
20161211_114100.jpg
20161211_114100.jpg (2.51 MiB) Viewed 7635 times
All painted and ready to vac form ABS onto them.
20170109_230257.jpg
20170109_230257.jpg (2.63 MiB) Viewed 7635 times
Vac formed panels trimmed and ready.
20180216_082033.jpg
20180216_082033.jpg (6.42 MiB) Viewed 7635 times
Fitted to a Jimny
j1.jpg
j1.jpg (3.27 MiB) Viewed 7635 times
j2.jpg
j2.jpg (3.17 MiB) Viewed 7635 times
j3.jpg
j3.jpg (2.84 MiB) Viewed 7635 times
j4.jpg
j4.jpg (3.13 MiB) Viewed 7635 times
Gen2.5 modification....no more plastic quarter bumpers.
20180826_171235.jpg
20180826_171235.jpg (4.41 MiB) Viewed 7635 times
The bodykit now fits to steel bumpers and optionally with some fudging....the standard front bumper.
20180827_162757.jpg
20180827_162757.jpg (4.4 MiB) Viewed 7635 times
Post Reply