GenII Jimny Bodykit

[Keith Phillips]

I was quite happy with the GenI Jimny bodykit......just needed a little something else

I'd built my own CNC Router 4 or 5 years previous so decided to draw some patterns up and machine them then coat them in epoxy pattern paint to make them last longer.

Here's the rendering from the 3D Models.

untitled.12.png (2.83 MiB) Viewed 8453 times

So onto actually machining the patterns.

20150818_202342.jpg (3.77 MiB) Viewed 8453 times

20161211_114100.jpg (2.51 MiB) Viewed 8453 times

All painted and ready to vac form ABS onto them.

20170109_230257.jpg (2.63 MiB) Viewed 8453 times

Vac formed panels trimmed and ready.

20180216_082033.jpg (6.42 MiB) Viewed 8453 times

Fitted to a Jimny

j1.jpg (3.27 MiB) Viewed 8453 times

j2.jpg (3.17 MiB) Viewed 8453 times

j3.jpg (2.84 MiB) Viewed 8453 times

j4.jpg (3.13 MiB) Viewed 8453 times

Gen2.5 modification....no more plastic quarter bumpers.

20180826_171235.jpg (4.41 MiB) Viewed 8453 times

The bodykit now fits to steel bumpers and optionally with some fudging....the standard front bumper.

20180827_162757.jpg (4.4 MiB) Viewed 8453 times